Filter
Top Products
Specifications
Miscellaneous
112
P1003636-002 TTP 7030™ Technical Manual 10/05/2009
Miscellaneous
Paper Specification
General
Thermal coating
Weight 2.4 kg (80 mm), 2.85 kg (112 mm)
Typical throughput 1.5 s/printout (length 75 mm, print, cut, and present)
Power requirements 80 mm version: 24Vdc ±10%, idle 150 mA, average 2.5A,
peak 8.5A
112 mm version: 24Vdc ±10%, idle 150 mA, average 3.5A,
peak 11A
Paper supply Roll paper with heat sensitive coating (thermal paper)
Type of paper Paper types are available on zebra.com
Number of layers One
Paper weight 55—110 g/m²
Paper thickness 0.054—0.10 mm
Surface smoothness 450-s minimum according to Bekk TAPPI T 479
Reflection 80% minimum according to SCAN P3
Core Paper or plastic
Core inner diameter Minimum 25 mm
Paper end Must not be glued to the core
Paper width 80 +0/–0.3 mm, or 112 +0/–0.3 mm depending on model
Paper length Approx. 150 m (with 110-mm roll diameter and 65 g/m²)
Approx. 250 m (with 150-mm roll diameter and 65 g/m²)
Approx. 450 m (with 200-mm roll diameter and 65 g/m²)
Thermal coating Outer side
Sensitivity Activated at approx. 68 °C saturated at approx. 75 °C.
Dynamic sensitivity 1.14 ±0.04 OD
Top coating Standard, semi or UV (if applicable)