Filter
Top Products
Programming
Graphics Commands
46
P1003636-002 TTP 7030™ Technical Manual 10/05/2009
Prints a ruler line across the paper.
A ruler line is normally used to divide the printout into logical parts to make it easier to read. A
ruler line is actually an area defined by a start X-Y position and a stop X-Y position. This area
is filled with black or a checkered pattern.
Figure 17 • Printout with checkered ruler line
ESC r n1...n9
Print Ruler Line
1B 72 n1...n9 hex
27 114 n1...n9 decimal
n1n2 Two byte definition of the X start position
n3n4 Two byte definition of the Y start position
n5n6 Two byte definition of the X stop position (must be larger than n1n2)
n7n8 Two byte definition of the Y stop position (must be larger than n3n4)
n9 Fill pattern, 0=black, 3= Checkered
<ESC>r<000><000><000><000><001><193><000><024><003>
X start Y start
X stop Y stop
Fill
0=black
3=checkered
SW99006