P4T/RP4T
User Guide
24
Display Functions Not Controlled from the Keypad
While the parameters in this table can appear on the display they can be set only by using a PC running Zebra’s Label Vista label cre-
ation program and a data cable link to the printer.
Function Default setting Scroll & Select Options
WLAN ID Factory Set Value N/A
Tear-o Position (Top of Form) 00
• Increase (max. = +10)
• Decrease (min. = -120)
Network & RF Settings
• All protocols On
• Protocols On or O individually
Bridge Mode O
• O
• On
DTR/VBUS-Power O O
• On
• O
Present-at 000
• Increase (max.= +120)
• Decrease (min. = 000
Bluetooth parameters n/a Displays current Bluetooth operating parameters
802.11g operating parameters n/a Displays current 802.11g WLAN parameters
Media Type Journal
•Journal
•Label
Section Continues
Printer Preparation
pg. 7
Connecting the
Printer pg. 27
Radio Regulatory
Information pg. 31
RP4T Printers pg.
35
Maintenance pg. 36
Troubleshooting pg.
38
Specications pg.
43
Appendices pg. 46 Index pg. 52
P4T Overview-
pg. 5
Manual
Introduction pg. 4