Filter
Top Products
P4T/RP4T
User Guide
8
Section Continues
Approved Chargers
The following table lists battery chargers approved for use with the P4T Series Printer.
Use of chargers not approved by Zebra specifically for use with the P4T Series will void the warranty and could cause damage
to the printer or the battery pack. Zebra is not responsible for any damage to equipment caused by the improper use of
unauthorized equipment.
Description Part no Notes.
LI72 single
charger)
AT17696-xx
1
AT18737-xx
Must be used with battery
removed from printer
AC Adapter/US
Line Cord
AK18913-002
Must be used with battery
installed in printer
AC Adapter/UK
Line Cord
AK18913-006
Must be used with battery
installed in printer
AC Adapter/EU
Line Cord
AK18913-007
Must be used with battery
installed in printer
UCLI72-4 Quad
Charger
AC18177-xx
1
Must be used with battery
removed from printer
Single Battery Charger
The LI72 Charger
LI72 charger is a wall mounted fast charger with a universal 110 to
230, 50-60 Hz. VAC input. Multiple AC plug configurations comply
with most international standards. This charger is intended for use
with the P4T Series printers which are equipped with Lithium Ion
(Li-ion) batteries.
Full part numbers are determined by the AC mains connectors.
Consult Zebra or your authorized re-seller for full part number in-
formation.
The LI72 will charge a battery pack as fast as its charge level will
allow, and then switch over to a maintenance charge to keep the
charge at its maximum.
Yellow Green
Figure 2: LI72 Single Charger
Description Part no Notes.
15-60V DC
Adapter/Right
Angle
AK18913-003 N/A
1. Full part number is determined by the AC main adapter
appropriate for the region of intended use. Consult your Zebra
sales represenetative or the factory for the appropriate part
number.
LI72 Charger
AT17696-xx
Printer Preparation
pg. 7
Connecting the
Printer pg. 27
Radio Regulatory
Information pg. 31
RP4T Printers pg.
35
Maintenance pg. 36
Troubleshooting pg.
38
Specications pg.
43
Appendices pg. 46 Index pg. 52
P4T Overview-
pg. 5
Manual
Introduction pg. 4