Filter
Top Products
4
P4T/RP4T
User Guide
Thank you for choosing one of our Zebra P4T Series Mobile Print-
ers. The P4T Series consists of two models. The P4T can print
on direct thermal or thermal transfer media. The RP4T can print
on direct or thermal transfer media and also encode special RFID
media.
Because these printers are made by Zebra Technologies, you’re
assured of world-class support for all of your bar code printers,
software, and supplies.
• This User’s Guide gives you the information you’ll need to
operate and maintain both the P4T and RP4T models.
• P4T Series printers use the CPCL programming language. To
create and print receipts and labels using the CPCL language,
refer to our Label Vista™ label creation program or the Mobile
Printing Systems CPCL Programming Manual which are both
available on our Web site at: www.zebra.com/manuals .
• P4T Series printer software also includes interpreters for the
ZPL II
®
programming language (up to Version 30.8.4). Manuals
for the ZPL label design programming language are also avail-
able on our Web site. Refer to Appendix “F” of this manual
for more information on accessing and downloading manuals
and other user information.
Always refer to the Important Safety Information data sheet
shipped with each printer and the Technical Bulletin shipped
with each battery pack. These documents detail procedures
to ensure maximum reliability and safety while using this
printer.
Unpacking and Inspection
Inspect the printer for possible shipping damage:
• Check all exterior surfaces for damage.
• Open the media cover (refer to “Loading the Media” in the
Printer Preparation section) and inspect the media compart-
ment for damage.
In case return shipping is required, save the carton and all pack-
ing material.
Reporting Damage
If you discover shipping damage:
• Immediately notify and file a damage report with the shipping
company. Zebra Technologies Corporation is not responsible
for any damage incurred during shipment of the printer and
will not cover the repair of this damage under its warranty
policy.
• Keep the carton and all packing material for inspection.
• Notify your authorized Zebra re-seller.
Section Continues
Introduction to the P4T Series
Printer Preparation
pg. 7
Connecting the
Printer pg. 27
Radio Regulatory
Information pg. 31
RP4T Printers pg.
35
Maintenance pg. 36
Troubleshooting pg.
38
Specications pg.
43
Appendices pg. 46 Index pg. 52
P4T Overview-
pg. 5
Manual
Introduction pg. 4