Zebra Technologies P4T Printer User Manual


 
P4T/RP4T
User Guide
7
Printer Preparation
Battery Safety
The Battery Packs used on Zebra Mobile Printers contain a great deal of energy and can cause personal injury or start a fire if used
improperly or carelessly. Please observe the following safety practices:
Caution • Avoid accidental short circuiting of any battery. Allowing battery terminals to contact conductive material will
create a short circuit which could cause burns and other injuries or could start a re.
Caution • Batteries can explode or catch fire if improperly charged or exposed to high temperatures or fire. Do not disassemble,
crush or expose batteries to water.
Caution • Use of any charger not approved specifically by Zebra for use with its batteries could cause damage to the battery
pack or the printer and will void the warranty.
Read carefully and always observe the safety guidelines for Li-ion batteries provided with each Battery Pack.
Charger Safety
Do not place a charger in locations where liquids or metallic objects may be dropped on the charger or, in the case of the
UCLI72-4 Quad Charger, into the charging bays.
Use care in locating any of the approved P4T Series single chargers, the AC Adapter or the UCLI72-4 Quad Charger. Do not
block the ventilating slots on the top and bottom covers. Ensure that the Charger is plugged into a power source which won’t
accidently be turned o if you will be charging batteries overnight.
Required Regulatory Text for Argentina
Only certified adaptors with the following electrical characteristics shall be used. The use of different adaptors could damage
the device, present hazards to the user and declare the correspondent guaranty void.
LI72: Input ratings: 100-240 VAC 50/60Hz 200mA., Class 2
Output ratings: 8.4 VDC, 800 mA
Section Continues
Printer Preparation
pg. 7
Connecting the
Printer pg. 27
Radio Regulatory
Information pg. 31
RP4T Printers pg.
35
Maintenance pg. 36
Troubleshooting pg.
38
Specications pg.
43
Appendices pg. 46 Index pg. 52
P4T Overview-
pg. 5
Manual
Introduction pg. 4