3 Voice System Administration Message Administration
UCS 1000 R4.2 Administration 585-313-507 Issue 3 April 2000 74
~ event — Specifies that the delivery system send all event level
messages (priority “–”) to the event log. The event log may be
accessed via the display messages command or the Message Log
Report window.
4 Press F3 (Save).
The system redisplays the System Message Display window (Figure 47
on page 69) showing the new message destination.
5 Complete the Saving Changes and Exiting Message Administration on
page 83 procedure.
The system installs the changes on the voice system.
Removing Message Destinations
This procedure allows you to remove a destination from the current list of
destinations for the current system message.
To remove a message destination:
1 Start at the System Message Display window (Figure 47 on page 69) for a
given message, and press
F8 (Chg-Keys).
The system displays the alternate set of function keys.
2 Press F2 (Rem–Dest).
