A SERVICE OF

logo

Open as PDF
next previous
4 Switch Interface Administration Digital Interfaces
UCS 1000 R4.2 Administration 585-313-507 Issue 3 April 2000 186
Unassigning ISDN-
PRI Layer 1 Card
Note: Before attempting to make any assignment changes to circuit
cards, they must be in the MANOOS state. See Equipment State
on page 103 in Chapter 3, Voice System Administration , for
additional information. If you change digital protocol assignments
on the voice system, you must also make the change on the
switch.
To unassign the ISDN-PRI Layer 1 protocol to a digital circuit card:
1 Start at the ISDN-PRI Layer 1 menu (Figure 98 on page 175) and select:
The system displays the Unassign Card: ISDN-PRI Layer 1 window
(Figure 102 on page 187
).
> Unassign Card