A Summary of Commands display card
UCS 1000 R4.2 Administration 585-313-507 Issue 3 April 2000 436
• mtc — Displays all cards being used by the maintenance process.
• manoos — Displays all cards in the manual out-of-service state.
• broken — Displays all cards in the broken state.
• ins[erv] — Displays all cards that have at least one channel in the
in-service state.
• netoos — Displays all cards that have at least one channel in the network
out-of-service state.
• hwoos — Displays all cards that have at least one channel in the
hardware out-of-service state.
• foos — Displays all cards that have at least one channel in the facility
out-of-service state.
If more than one option is used, only cards that satisfy all the options given
are displayed. If an invalid combination of options is given, the system
displays an error message.
Examples
The following example displays card information on channel 2 port 0.
disp card 2.0
The following example displays information on all cards.
disp card all
