A SERVICE OF

logo

6 Peripheral Administration Modem Administration
UCS 1000 R4.2 Administration 585-313-507 Issue 3 April 2000 262
16 Press F2 (Select).
The LCD displays the baud.
17 Press the single .
Modem response:
Edit StrapGroup
18 Continue with the next procedure, Setting the Error Control Mode to
Buffer Mode on the 3820 Modem on page 262. Do not return to the
top-level menu.
Setting the Error Control Mode to Buffer Mode on the 3820 Modem
To set the error control mode to buffer mode:
1 Press or to display V42/MNP/Buffer.
2 Press F1 (Edit).
Modem response:
Err Control Mode
3
Press or to display BufferMode.
4 Press F2 (Select).
5 Press F1 (Next) to display Flw Cntl of DTE.