A SERVICE OF

logo

6 Peripheral Administration Modem Administration
UCS 1000 R4.2 Administration 585-313-507 Issue 3 April 2000 257
Configuring the
Modem Using the
Modem Control
Panel
The 3820 and 3920 Plus modems have a Diagnostic Control Panel (DCP)
that is the user interface to the modem. Use the procedures below to
configure the 3820 modem via its control panel:
Activate the Unix Dial Default Factory Configuration
To activate the UNIX Dial default factory setting:
1 Turn the modem off and then back on.
2 Press or on the modem to display Configure.
3 Press the function key under Configure (F1 or F2).
Modem response:
Ld EditArea frm.
4 Press or to display Factory.
5 Press F1 to display the factory preset configuration.
Modem response:
LD Fact Preset:
6 Press or to display Unix Dial.