A SERVICE OF

logo

Open as PDF
next previous
A Summary of Commands sysmon
UCS 1000 R4.2 Administration 585-313-507 Issue 3 April 2000 598
code headers are required for speech that is to be used with the voice
system.
See Also
addhdr
sysmon
The sysmon command executes a program that monitors incoming
telephone lines and the associated cards to see that they are functional.
Synopsis
sysmon <page number>
Description
The sysmon command verifies that each incoming telephone line and its
associated card are functional. Before initializing the test, locate a touchtone
telephone close to the system controller and get a telephone number to be
used for dialing into the system. Use the assign channel command to assign
to a group any channels you want to test. Then, use the assign
service/startup command to assign a script to the same group.