NEAX2400 IPX Feature Programming Manual
Page 1026 NDA-24297, Issue 1
S-60 Synchronous Data Switching - CCIS
Programming (cont’d)
RING: Type of Ringing (0-3
KYN: Key Number (1-40)
KYI: Service Index
0: Key Not Used
1: Feature Key
2: Multi-line Key
KD: Assign as 0.
FKY: Feature Key Number
The feature keys, DATA TRANSFER DTX (FKY = 31), DATA (FKY = 29) must be assigned.
DISPLAY/AUTO (FKY = 30) is optional.
STEP 3: ASFC - for TEC = 13 stations, construct an SFC in which SFI 11 = 0 for DATA LINE SECURITY.
STEP 4: ARSC - Construct a Route Restriction Class that allows access to the desired incoming and outgoing
routes. Those routes include PA-24DTA ACIS and CCIS routes.
STEP 5: ATNR - Allow tenant-to-tenant connection for Inter and Intra-tenant connections. Assign Tenant
Restriction Index (TRI) = 1.
STEP 6: ACFR - Allow all incoming Call Class Index (CCI) for Transfer Service Feature Index (TSFI) = 1.
STEP 7: ADA1 - The following attributes are assigned via the MAT using this command:
MEDIA: 2
CNTP: 0
TCP: 0
FCY: 0
PRI: 0
REST: 0
SRP: 0
STEP 8: ADA2 - It is possible to program Attribute Data 2, 3, and 10 from the MAT.
STEP 9: ARTD - The CCIS Tie Line voice/data route(s) over T-1 should be assigned as follows. For
SYNCHRONOUS DATA SWITCHING - CCIS CDN 45:A/D must be assigned as data “1” and CDN
30:PAD must be assigned as data “5”.
RT:1
2-ONSG :2 4-ISNG :2 5-TF :3 6-TCL :4 7-L/T :1
8-RLP :2 13-AC :1 15-LSG :12 30-PAD :5 45-A/D :1
43-BT :1 49-TRKS :0/1*
Note: First Press DATA; then DTX key. This is an on-hook condition.
