NEAX2400 IPX Feature Programming Manual
Page 440 NDA-24297, Issue 1
L-7D Line Reconnect - Same Line - D
term
L-7D Line Reconnect - Same Line - D
term
General Description
This feature allows a user to disconnect a call and receive dial tone by pressing the RECALL key.
Operating Procedure
While a call is in progress
1. Press the RECALL key; disconnect and receive dial tone on the same line.
2. Userisreadytodialagain.
Service Conditions
1. Conflicting service features are: CALL TRANSFER - ALL CALLS [C-11], CONSULTATION HOLD -
ALL CALLS [C-17] and CALL HOLD [C-6]. Pressing RECALL key will result in reconnection of the
held line.
2. System should be programmed to provide for First Party Release.
3. If the system is not programmed for First Party Release and programmed as Calling, Called, or Both Party
Release, a release guard is activated. If a party is not allowed to terminate a call and presses RECALL key,
that station remains connected to the original call.
Programming
ASYD - System Data 1, Index 4, Bits 2 and 3.
Releasing Method for Station-to-Station Calling Service
b3
b2 = Calling Party Release
00
b3
b2 = Called Party Release
01
b3
b2 = First Party Release
10
b3
b2 = Both Party Release
11
FCCS Programming
No unique programming is required for the FCCS network.
