NEAX2400 IPX Feature Programming Manual
Page 314 NDA-24297, Issue 1
D-114 Delay Announcement - Attendant
Programming (cont’d)
TC=3.2 sec. MTC=0-15
SYS1, Index 244. b5=1 (Announcement is provided immediately after the ring back tone)
SYS1, Index 245. Timer for Delay Announcement - Attendant (Duration of Music on Hold)
Timer for duration of RBT = TC X MTC
TC=3.2 sec. MTC=0-15
SYS1, Index 246. Attendant Delay Announcement
0/1= Single Playback/Multiple Playback
STEP 2: ARTD - Assign the route data of the Announcement Trunk
15: LSG = 5
28: ANS = 0 (Access to announcement trunk is controlled by the current operation (Timer
Control).)
= 1 (Answer and Release Timings are determined by DAT itself or the external
announcement equipment.)
Note: When the external announcement equipment is used, assign “1” in ANS parameter.
STEP 3: ATRK - Assign the trunk data of the Announcement Trunk.
STEP 4: MBTK - Cancel the make-busy of the trunk assigned by ATRK.
STEP 5: AAED - Assign the data to the announcement unit number and the route data, etc. assigned by ATRK.
EQP = 49, 50, 51, 52, 53 (for the 1st announcement)
= 54, 55, 56, 57, 58 (for the 2nd announcement)
RT: route number
TK: trunk number
C: 1
R: 1
A: 1
M: 1 (Multiple connection)
STEP 6: ASTD - Allow tandem connection between COT and the Announcement trunk.
STM - 0, STS = 2, ST = 1
STEP 7: ARRC - Cancel the restrictions on the trunk route for Incoming Trunk and the route for the
Announcement Trunk.
ICRT: Route Number for Incoming Trunk
OGRT: Route Number for Announcement Trunk
ARI-D RES: 1
FCCS Programming
No unique programming is required for the FCCS network.
