NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1
Page 399
Intercom Calling I-9
I-9 Intercom Calling
General Description
This feature allows a sub-line appearance, assigned to a D
term
,tobeusedforINTERCOMCALLING.
Operating Procedure
To originate
1. Press the Intercom sub-line appearance.
2. Lift the handset or press the SPEAKER key; dial tone is heard.
3. Dial an Intercom station, receive ringback tone. The display will show:
4. The called party answers and the conversation begins.
To answer
1. Ringing is heard from the Intercom sub-line.
2. Press the Intercom sub-line appearance. The display will show:
3. Lift the handset or press the SPEAKER key.
4. The conversation can then begin.
Service Conditions
1. An Intercom sub-line appearance cannot be the Prime Line of a D
term
.
2. An Intercom sub-line appearance cannot call any station or trunk in a system other than another Intercom
sub-line appearance.
3. An Intercom sub-line appearance cannot activate any features.
4. An Intercom sub-line appearance must be assigned as a Software Line Appearance.
5. This feature is only available for D
term
s.
6. Intercom sub-lines must be allowed the service feature restriction of SFI=70.
7. FCCS link is not available for this feature.
Interactions
1. As an example for Group Calling application, the following conditions exist:
System Station Numbering:
5XXXX and 6XXX
Speed Calling Access:
3(AssignedinASPA)
100 Groups of Ten Stations
Group Calling Station
ICM
XXXX
(Time Display)
ICM
XXXX
(Time Display)
