NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1
Page 405
Inter-Office Off-Hook Queuing I-11
FCCS Programming (cont’d)
Index 68, b3: Enables automatic cancel timer
0/1 = -/Automatic cancel timer is Available
Index 159: Designate Automatic Cancel Timer
STEP 2: ASPAN - These data must be assigned to the NCN.
TN: Tenant Number
ACC: Access number
CI: B = Busy (for Entry), N = Normal (for Cancel)
SRV: SSC
SID: 19 = OG Queuing-Entry
CI: N = Normal
SID: 20 = OG Queuing-Cancel
Note 1: When using ASYDL or ASYDN to program an FCCS feature, the basic programming of ASYD is required
in addition to ASYDL or ASYDN.
Note 2: The current data should also be set in addition the above-mentioned command:
The command to be set to the node that accommodates the trunk: ARTD
The command to be set to all the nodes: ASFC, AKYD
