NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1
Page 685
Station-to-Station Calling S-11
Programming (cont’d)
STEP 2: ATNR - Assign for Tenant Restriction Index (TRI) 0. This index allows for station-to-station calling
between the same tenant and between different tenants.
DAY/NIGHT: Day/Night Mode
D: Day Mode
N: Night Mode
OGTN: Originating Tenant
TMTN: Terminating Tenant
TRI: Tenant Restriction Index (0-15)
RES: Restriction Data
0: Restricted
1: Allowed
TRI: Tenant Restriction Index
0: Allows Intra and Inter-tenant station calls. Allow call within tenant.
1: Allows CALL FORWARDING-ALL CALLS, -DON’T ANSWER, and -BUSY
LINE on an Intra and Inter-tenant basis. Allow this feature within self-tenant.
2: Allows or restricts incoming calls via the Night Attendant Console from tenant
to tenant. This allows the tenant, as assigned to a trunk, to be terminated to a
tenant, as assigned to a station.
3: Allows the CALL FORWARDING-ALL CALLS, DON’T ANSWER, and
BUSY LINE on an Intra and Inter-tenant basis, as when set by the Attendant
Console.
4: Allows or restricts incoming calls to the Attendant Console on a per-tenant
basis. Thus, an Attendant may handle calls only for a specific tenant.
5: Day/Night Mode Change Restriction.
6: Not used
7: Not used
FCCS Programming
No unique programming is required for the FCCS network.
