NEAX2400 IPX Feature Programming Manual
Page 240 NDA-24297, Issue 1
C-81 Call Forwarding - I’mHere
FCCS Programming (cont’d)
SYS1, Index 5, b1~3. Maximum number of Multiple Call Forwarding - All Calls/Busy Line
occurrences:
Note: This data is valid when SYS-1, Index 69, bit 7 is assigned as “1”.
SYS 1, Index 69, b1. Send short tone when a call forwarded via Call Forwarding - All Calls service is
answered.
0/1 = Not Required/Required
SYS 1, Index 69, b7. Multiple Call Forwarding - Busy Line/All Calls
0/1 = Out/In Service
SYS 1, Index 248, b7. Tone to be sent out when the handset is off-hook at the station on which Call
Forwarding - All Calls service is set.
0/1 = Dial Tone (DT)/Special Dial Tone (SPDT)
SYS2, Index 6, b4. Call Origination Restriction of Station upon Setting Call Forwarding - All Calls
0/1=Required/Not Required
STEP 2: ANPDN - Assign the first number of the numbering level for feature set and cancel access code.
STEP 3: ASPAN - Assign the feature access code.
CI = N, SRV=SSC and SID28 (Call Forwarding - I’mhere;set)
CI = N, SRV=SSC and SID29 (Call Forwarding - I’m here; cancel)
STEP 4: ASFC - Assign the service restriction data.
Assign RES = 1 (allowed) against SFI 99 (forwarding party for Call Forwarding - I’m here)
and SFI 100 (Forwarded destination for Call Forwarding - I’m here)
Note
Note:
SFI 100 should be allowed at the node that the destination station belongs to.
