NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1
Page 555
Outgoing Trunk Queuing O-2
FCCS Programming (cont’d)
CI: N = Normal
SID: 20 = OG Queuing-Cancel
STEP 3: ANPDN - These data must be assigned to the NCN.
TN: Tenant
1st DC: 1st Digit
CI: Normal (N), Hooking (H) and Busy (B)
NND: Number of Necessary Digits
BLF: Busy Lamp Field
STEP 4: ARTDN - These data must be assigned to the NCN.
LGRT: Logical Route Number
Assign CDN 9:TQ, Trunk Queuing Service = 1
Note 1: When using ASYDL or ASYDN to program an FCCS feature, the basic programming of ASYD is required
in addition to ASYDL or ASYDN.
Note 2: The current data should also be set in addition the above-mentioned command.
The command to be set to the node that accommodates the trunk: ARTD
The command to be set to all the nodes: ASFC, AKYD
