3Com 3500 Switch User Manual


 
24 C
HAPTER
1: S
YSTEM
AND
S
ETUP
O
VERVIEW
FDDI Modules
FDDI modules are available in the following
configurations:
FDDI MMF
— Connects to multimode fiber-optic
cable and provides a transmission distance of up to
2 km (1.24 mi) using 62.5-micron fiber.
FDDI SMF
— Connects to single-mode fiber-optic
cable and provides a transmission distance of up to
14.4 km (8.95 mi) using 9-micron fiber.
FDDI MMF and FDDI SMF modules contain six FDDI
ports that use fiber (SC) connectors, providing a
100 Mbps FDDI connection over fiber-optic cable. The
ports support both SAS (single-attached station) and
DAS (dual-attached station) modes to provide a
maximum of six SAS connections or three DAS
connections.
Each system can accommodate up to four FDDI
modules. The modules are hot-swappable.
Figure 5 illustrates the FDDI MMF module. The FDDI
SMF module is similar.
Figure 5
FDDI MMF Module
For module installation instructions, see Chapter 3 or
the guide that is shipped with the module.
FDDI MMF
3C35410
PWR
INS
ERR
L
E
T
L
E
T
L
E
T
L
E
T
L
E
T
L
E
T
A1 A2 A3
B4 B5 B6