6
Q
UICK
S
ETUP
FOR
M
ANAGEMENT
A
CCESS
This chapter provides easy instructions for configuring
the CoreBuilder
®
3500 system for management
access. After you decide how you want to manage
your system, follow the configuration instructions for
your preferred type of management access.
About System Management
The Administration Console is an internal,
character-oriented, menu-driven user interface for
performing system administration. You can access the
Administration Console using the serial ports or
Internet Protocol (IP). For more information, see the
Command Reference Guide on the Software and
Documentation CD.
For more complete network management, use an
external SNMP-based application, such as 3Com’s
Tra nsc en d
®
Enterprise Manager or another network
management application, and access the system
using IP.
3Com also provides the embedded Web
Management suite of applications. This set of system
administration tools allows you to manage the system
over the Internet through a Web browser. The
Software and Documentation CD includes some
additional installable tools and the Web Management
User Guide.
How Do You Want to Manage the System?
Table 13 describes the access mechanisms.
These management access mechanisms are described
more completely in the next sections.
Tab le 1 3
Management Access Mechanisms
Access
Mechanism
Access Description Interface
Te rm i n al Connect directly to the
Administration Console and
stay attached during system
reboots
Terminal serial port
Modem Access the Administration
Console from remote sites
Modem serial port
IP
■
Access the Administration
Console using rlogin or
Telnet commands
OR
■
Use an external SNMP
management application to
communicate with the SNMP
agent
OR
■
Access the system’s Web
Management software across
the Internet with a Web
browser
Port assigned an IP
address