Filter
Top Products
36 C
HAPTER
4: C
ABLING
Cabling the 100BASE-FX Module
The 100BASE-FX module has six Fast Ethernet ports
that use SC connectors and provide 100 Mbps Fast
Ethernet connections over fiber cabling. The
100BASE-FX module is available for either
single-mode fiber (SMF) or multimode fiber (MMF).
To cable the 100BASE-FX module:
1
Read and follow “Fiber and Laser Safety Precautions”
in the previous section for safe operation.
2
Plug the male SC connector on the fiber cable into
the selected port on the Fast Ethernet module until it
clicks into place. See Figure 14.
3
Attach the other end of the fiber cable to the
network device that you want to connect.
Figure 14
Cabling the 100BASE-FX Module
C
INS
MODEM
TERMINAL
ETHERNET
10BT
100 BASE - FX
3C35220
PWR
INS
ERR
1X
L
E
T
2X
L
E
T
3X
L
E
T
6X
L
E
T
5X
L
E
T
4X
L
E
T
100BASE-FX module
SC connector