Filter
Top Products
ABOUT THIS GUIDE
This guide describes how to install and configure the
3Com 3C389 TokenLink Velocity PC Card, and is
intended for the token ring network administrator,
operator, or hardware installer. A knowledge of token
ring networks and microcomputer hardware configuration
procedures is required.
If the information in the README.TXT file or the Release
Notes differs from the information in this guide, follow
the information in the README.TXT file first, the Release
Notes second, and the user guide third. The README.TXT
files are on the software diskettes; the printed Release
Notes are placed in the product box or inserted in the
user guide when the product is packed.
How to Use This Guide
This table shows where to find specific information in this
guide.
If you are looking for... Turn to...
Features of the 3C389 TokenLink Velocity PC Card Chapter 1
Installing the 3C389 TokenLink Velocity PC Card Chapter 2
Installing the network device drivers for a specific operating system Chapter 3
Using LANAID for network device driver configuration Chapter 4
Troubleshooting and error codes Chapter 5
Using the diagnostic utility Chapter 5
Using a Memory Manager Appendix A
Specifics about SystemSoft Card and Socket Services Appendix B
Hot-Pluggability and Suspend/Resume Appendix C
Contacting 3Com technical support Appendix D