Filter
Top Products
Novell NetWare Client 32 for Windows 95 Installation 3-9
Novell NetWare Client 32 for Windows 95 Installation
1 Click Remove PC Cards from the Network Control
Panel for any PC Cards that are no longer in the
system or that you are removing.
2 In a DOS window, change to the \windows\inf
subdirectory.
3 Delete the TOKENCS.INF file.
4 Copy the new .INF file for your driver from the
TokenDisk diskette #2 \novell\netware directory
into the \windows\inf directory.
5 Complete the Client 32 installation.
6 Reboot the machine to effect the changes and load
the new driver.
Novell NetWare Client 32 for Windows 95 installation is
now complete.
OS/2 NDIS 2 Device Driver Using LAN Adapter
Protocol Support (LAPS)
If your OS/2 network operating system has not yet been
installed on your PC, install it now and follow its
instructions for installing device drivers. If an OS/2 network
operating system has previously been installed, follow the
instructions here for using LAPS to install device drivers.
1 Insert TokenDisk diskette #2 into the floppy drive.
2 Enter laps at the OS/2 prompt.
LAPS is usually located in the \ibmcom subdirectory on
the boot drive.
3 Click Install.
You will be prompted for the source of the .NIF file.
4 Type:
a: [Enter]
5 Click OK when the Installation Complete message
appears.
You will return to the main menu.