Filter
Top Products
B
SYSTEMSOFT CARD AND
SOCKET SERVICES SPECIFICS
Complete the following procedure to install the
3C389 PC Card on Compaq PCs using SystemSoft Card
and Socket Services with DOS or Windows 3.1:
1 After installing and configuring the card using
LANAID, go to the CPQDOS directory, or the
directory containing SystemSoft C&SS and the file
PC-CARD.EXE.
2 Run PCCARD.BAT, click Utility and then Resource
Allocation.
3 Click Open and the appropriate memory range for
the card.
4 Click Edit and then Change.
5 Change the memory range to comply with the
range of the card and then click Include.
When performing step 5, it may be necessary to change
the exclude range specified in the EMM386 driver
setting in the CONFIG.SYS file.
6 Click OK.
7 Click the appropriate I/O and IRQ ranges for the
card and include their ranges as well by repeating
the previous three steps.
8 Click Save and remove any cards from their slots
when prompted to do so.
9 Click OK, Done, File, and then Exit.
10 This procedure will modify the CSALLOC.INI file.
11 The CARDID.INI file may also need to be edited
manually to comply with the card’s settings.