Filter
Top Products
4
LANAID AND
IBM LAN CLIENT
After you have installed the 3C389 PC Card and the
network drivers, you must configure the 3C389 PC Card
software to operate with your PC and network operating
system. You will need the manuals that were shipped
with your network operating system.
LANAID
LANAID is a software tool shipped on the 3C389 PC Card
TokenDisk diskettes. Use LANAID to configure the 3C389
PC Card to work with any of the following network device
drivers:
LANAID requires that Card Services or an Intel socket
controller that is compatible with the point enabler be
installed.
■ IBM LAN Support Program/Native
■ IBM LAN Client
■ DOS Client 16 for Novell NetWare lower than 3.12
■ DOS Client 16 for Novell NetWare 3.12 and 4.0
■ DOS Client 16 for Novell NetWare 4.01 and higher
■ OS/2 Novell NetWare Client
■ Artisoft LANtastic 6.0, 7.0
■ Banyan VINES 6.X
■ Microsoft LAN Manager/NDIS
■ Windows for Workgroups\NDIS 2
■ Other DOS NDIS environments
LANAID can also install the IBM LAN Client. For all other
environments, you will use your network operating system
to change parameters in the 3C389 PC Card configuration.