Filter
Top Products
Windows NT 3.51 Installation 3-7
3 In the Control Panel Window, double-click the
Network icon.
4 Click Add Adapter.
5 Select <Other> – Requires disk from manufacturer
from the bottom of the Network Adapter Card drop
down list and click Continue.
The Insert Disk dialog box appears.
6 Insert TokenDisk diskette #2 into the floppy drive.
7 Type a:\nt and click OK.
The Select OEM Option dialog box appears.
8 Select 3C389 TokenLink Velocity PC Card and click OK.
The 3C389 PC Card driver and its associated files will be
copied from the diskette to the hard drive.
9 In the 3Com TokenLink Velocity PC Card dialog box,
click Configure.
10 Choose either Enhanced Mode or Compatibility Mode
and click OK.
Enhanced Mode uses less memory for the hardware
operation of the 3C389 PC Card. Compatibility Mode
allows the configuration to be used by earlier token ring
PC Cards such as the 3C689 PC Card.
The system lists acceptable defaults.
11 Set the displayed parameters and click OK.
Make sure the Ring Speed parameter is set to the correct
value.
12 Click Save to accept the configuration.
13 Click OK.
14 Restart the PC.
If this is a first time installation, Windows NT prompts you
to enter additional NOS configuration information, such
as client addresses and server names.
15 Restart the PC.
Windows NT 3.51 PC Card software installation is now
complete.