Filter
Top Products
Installing LANAID 4-3
IBM LAN Client provides support using one PC Card
specific LAN device driver instead of two different kinds
of drivers for your clients and servers. You select the
appropriate device drivers and protocol stacks for your
PC. The correct modules are automatically loaded based
on the options you select.
IBM LAN Client provides support for the following
protocols and clients:
■ For DOS 5.0 or higher:
NetWare Client-32 (IPX**/SPX)
IEEE 802.2
NetBIOS
DOS LAN Services
■ For Windows 3.1:
NetWare Client-32 (IPX/SPX)
IEEE 802.2
NetBIOS
TCP/IP
DOS LAN Services
■ For Windows for Workgroups 3.11:
NetWare Client-32 (IPX/SPX)
IEEE 802.2
NetBIOS
TCP/IP
DOS LAN Services
Installing LANAID
The LANAID graphical user interface operates under DOS
or in a full-screen DOS session of OS/2. (A DOS window
of OS/2 will not work correctly.) You need at least 1.5 MB
of free, extended memory and 300 KB of conventional
memory to run the program.
You can get help on each LANAID panel by selecting the
Help button at the bottom of the panel. You can get
context-sensitive help by placing your mouse pointer on
any part of the panel and pressing [F1].