Filter
Top Products
3-6 CHAPTER 3: INSTALLING THE NETWORK DRIVERS
Using Memory Management
■ If you are using Card and Socket Services, the
program will default to Autoset mode, which allows
the LAN driver to negotiate with Card and Socket
Services for available resources. LANAID will allow you
to select values for resources to be used by your
3C389 PC Card such as Interrupt, memory, and I/O
Base Address.
■ If you are not using Card and Socket Services in
Autoset mode, you must ensure that the values that
you select for Interrupt, MMIO, and SRAM do not
conflict with those for other PC Cards and resources
installed in your PC (such as video, sound, COM port).
■ If you are using EMM386, in most cases the memory
exclusions will be automatically handled by LANAID.
If you are using a memory manager, you must
exclude the memory ranges being used by your
3C389 PC Card (8-KB default).
The Microsoft Windows for Workgroups PC Card
software installation is now complete.
Windows NT 3.51 Installation
The NDIS 3.0 device driver for Windows NT 3.51 or
higher requires that Service Pack 2 or higher be installed
with your Windows NT system. It will function only in a
PC with an Intel 82365SL or compatible socket
controller. Windows NT does not support the Databook
socket controllers at this time. Check your PC user guide
to determine which controller is in your PC.
Make sure that the 3C389 PC Card with cable attached is
inserted before installing Windows NT.
1 On the Windows NT desktop, open the program
group Main.
2 In the Main Window, double-click the Control Panel
icon.