Filter
Top Products
4-4 CHAPTER 4: LANAID AND IBM LAN CLIENT
Complete the following procedure to install LANAID on
your hard disk:
1 At the DOS prompt, insert TokenDisk diskette #1 in
the drive and type:
a:install [Enter]
2 Change the drive, path, and directory for the
LANAID files, or press [Enter] to accept the default
values.
The LANAID program may display a prompt requesting
permission to modify the CONFIG.SYS and
AUTOEXEC.BAT files. The LANAID program launches
automatically after the files are and copied to the target
directory.
Using LANAID to Install IBM LAN Client
LANAID must be run from DOS or full screen DOS in an
OS/2 session.
1 Launch LANAID.
2 Click Network Software.
The Select Disk Drive window appears.
3 Enter the letter of the hard disk on which you want
to install IBM LAN CLient and click Continue.
The Network Operating System Choices window appears.
4 Select Install IBM LAN Client and click Continue.
The IBM LAN Client Installation window appears.
5 Select the appropriate operating system from the
drop down list box.
6 Select Express Install or Custom Install.
If you chose Custom Install go to step 7.
If you chose Express Install go to step 9.
When you choose Express Install, NetWare Client-32 and
frame type 802.2 are loaded as well as IBM LAN Client
using the default protocols provided for your 3C389 PC
Card type and operating system.