Filter
Top Products
3-8 CHAPTER 3: INSTALLING THE NETWORK DRIVERS
Windows NT 4.0 Installation
1 Insert TokenDisk diskette #2 into the floppy drive.
2 Right-click the Network Neighborhood icon.
3 Select Properties.
4 Click the Adapters tab.
5 Click Add.
The PC will generate a list of available NICs.
6 Click Have Disk.
The Insert Disk window appears.
7 Type a:\nt and click OK.
The Select OEM Option dialog box appears.
8 Select 3C389 TokenLink Velocity PC Card and click
OK.
The 3C389 PC Card driver and its associated files will be
copied from the diskette to the system.
9 In the 3Com TokenLink Velocity PC Card dialog box,
click Configure.
10 Choose either Enhanced Mode or Compatibility
Mode and click OK.
Enhanced Mode uses less memory for the hardware
operation of the 3C389 PC Card. Compatibility Mode
allows the configuration to be used by earlier token ring
PC Cards such as the 3C689 PC Card.
11 Set the displayed parameters and click OK.
Make sure the Ring Speed parameter is set to the correct
value.
12 Click Save to accept the configuration.
13 Click OK.
14 Restart the PC.
Windows NT 4.0 PC Card software installation is now
complete.