Filter
Top Products
C-4 APPENDIX C: HOT-PLUGGABILITY AND SUSPEND/RESUME
OS/2 NDIS Hot-Pluggability and Suspend/Resume
You can remove the card or go into suspend mode at any
time as long as you are not running any applications that
use shared resources. After you reinsert the card or
resume, you should have all of your LAN shared resources
connected. If you use CM/2 to connect to the host, you
will have to log on again.
One scenario that does not work is suspending and then
removing the card. The card will not be recognized when
it is reinserted. If you want to do something like this,
you must first remove the card and then suspend. You
can then resume later and reinsert the card later.