Filter
Top Products
3
INSTALLING THE NETWORK
DRIVERS
This chapter describes how to install network LAN drivers
other than IBM LAN Client. After installation, some
network drivers must be configured using LANAID, an
installation and diagnostic utility described in Chapter 5.
If you are installing the IBM LAN Client go directly to
Chapter 5.
Consult the following lists to determine if LANAID is
required to configure your network driver:
LANAID is not required to configure the following
drivers:
■ Windows 95
■ Windows NT 3.51
■ Windows NT 4.0
■ OS/2 NDIS 2 device driver using LAPS
■ OS/2 NDIS 2 device driver using MPTS
■ OS/2 NDIS 2 device driver using other installation
programs
■ Warp Connect
■ Warp Server
■ Novell NetWare Client 32 for Windows 95
LANAID is required to configure the following
drivers:
■ IBM LAN Support Program/Native
■ IBM LAN Client
■ DOS Client 16 for Novell NetWare lower than 3.12
■ DOS Client 16 for Novell NetWare 3.12 and 4.0