Filter
Top Products
3-4 CHAPTER 3: INSTALLING THE NETWORK DRIVERS
Windows 95 OSR 2 Installation
1 If you have not already inserted the 3C389 PC Card,
insert it now with cable attached.
The PC does not detect the 3C389 PC Card if the cable is
detached.
If PCMCIA support has been started on your machine,
the system will prompt you for a diskette.
If PCMCIA support has not been started on your
machine, complete the following sub steps.
a Click Start, Settings, and Control Panel.
b Click PC Card (PCMCIA) to start PCMCIA support, and
follow the instructions given.
2 When the Update Device Driver Wizard appears,
insert TokenDisk diskette #2 and click Next to search
the diskette for the driver.
3 If the driver is not found on the diskette, click Other
Locations and type:
a:\win95
4 When the driver is found, click Finish.
5 Set the parameters.
The system will list acceptable default values.
6 Follow the displayed instructions to copy the files.
Windows OSR 2 PC Card software installation is now
complete.
Windows for Workgroups/NDIS 2 Installation
If you are installing the 3C389 PC Card in a PC that
already has Windows for Workgroups installed, refer to
the Microsoft Windows for Workgroups User's Guide for
instructions on how to install and configure a third-party
device driver.