Filter
Top Products
3 - 4 ONline 10BASE-T Security Module Installation and Operation Guide
Unpacking Procedures
To unpack your Security Module:
1. Verify that the Security Module is the correct module by matching the
model number listed on the side of the shipping carton to the model
number you ordered.
Note that the product model number printed on the shipping box
differs from the model number on the product. The model number
on the shipping box contains the prefix ’3C9’.
If the module appears to be damaged, return it to the anti-static
shielding bag, repack it in the shipping carton, and contact your local
3Com supplier.
2. Remove the Security Module, in its anti-static bag, from the shipping
carton.
3. Remove the module from the anti-static shielding bag and inspect it
for damage. Save the package of screws in the carton; you will need
them when you attach a cable to the module. Always handle the
Security Module by the faceplate, being careful not to touch the
components.
Keep the shipping carton and anti-static shielding bag in which your
module was shipped in case you want to repackage the module for storage
or shipment. Record the serial number of your Security Module. A log for
information specific to your modules is provided under the Slot Usage
Chart in Appendix B of the ONline System Concentrator Installation and
Operation Guide.