Filter
Top Products
Configuring Security Features 4 - 13
Note: at least one autolearned address was skipped because
the port with which it is associated has more than 4
autolearned addresses.
If any MAC address was skipped because the concentrator limit was
reached, the following message displays upon completion of the Autolearn
Download command:
Note: the number of autolearned addresses exceeds the
concentrator limit. Only the first X addresses (as ordered
by slot, port, and addr) were downloaded.
Where x indicates 360 MAC addresses for an EMM or 400 MAC addresses
for TRMM.
Configuring Security Mode
The Security Module provides you with the flexibility of manually enabling
or disabling Security Mode for ports. Security Mode is enabled
automatically for the ports specified in the SET SECURITY PORT
SECURITY_TYPE command.
Issue the following command to enable security for all ports on the Security
Module in slot 3.
ONline> set security port 3.all mode enable [ENTER]
Security Type is automatically configured to Full (which includes both
Eavesdropping and Intrusion security) when you issue the SET SECURITY
PORT MODE ENABLE command.
You may enable Security mode for a port that does not have secure MAC
addresses associated with it. However, each packet received by a port will
have an invalid MAC address assigned and will therefore be treated as an
intrusion.
Note that Security Mode must be disabled in order for the EMM to
Autolearn MAC addresses for ports that are configured for Security Types
Intrusion or Full. If Security mode is not disabled for each port that is
configured for Intrusion Security: