Filter
Top Products
Configuring Security Features 4 - 3
4. Initiate Autolearning to
enable the EMM to
automatically learn the
valid MAC addresses
associated with a ports.
SET SECURITY AUTOLEARN CAPTURE
5. Download the learned
MAC addresses from the
Autolearning database to
the port MAC address table.
SET SECURITY AUTOLEARN
DOWNLOAD
TRMM Note: The TRMM does
not support Autolearning.
Therefore, you if you are using
a TRMM to manage the
Security Module, you must
manually add MAC addresses
to a port MAC address table.
SET SECURITY PORT MAC_ADDRESS
6. Define the Security type:
Eavesdropping_only,
Intrusion_only, or Full.
Note: Security Mode is
automatically enabled
when you issue the SET
SECURITY PORT
SECURITY_TYPE command.
SET SECURITY PORT SECURITY_ TYPE
7. Define the corrective action
the EMM is to take upon a
Security Intrusion attempt.
SET SECURITY PORT ACTION_ ON_
INTRUSION (only necessary if Security
Type is set to Intrusion_Only or Full)
8. Save Security configuration
values.
SAVE SECURITY
Table 4-1. Quick Reference for Configuring the Security
Module (Continued)
Procedure Command