Filter
Top Products
4 - 2 ONline 10BASE-T Security Module Installation and Operation Guide
Quick Reference for Configuring Security
Table 4-1 outlines the steps necessary to configure the security features of
your module. These procedures and command examples are explained
further throughout this chapter. If you are familiar with these instructions,
you may want to use this table as a checklist.
Table 4-1. Quick Reference for Configuring the Security
Module
Procedure Command
1. Disable Autolearning Mask
to allow the EMM to
Autolearn MAC addresses
for ports. (Enabling
Autolearning Mask
prevents the EMM from
learning a port's associated
MAC addresses.)
SET SECURITY AUTOLEARN MASK
2. Disable Security Mode to
allow the EMM to Autolearn
MAC addresses for ports.
SET SECURITY PORT MODE
3. Enable the ports to allow
traffic to pass through the
network so the EMM can
learn which MAC addresses
are associated with which
ports. (You must enable
ports in order for
Autolearning to run.)
SET PORT MODE