Filter
Top Products
4 - 20 ONline 10BASE-T Security Module Installation and Operation Guide
Note: Security Mode is not disabled automatically when you
delete a port's MAC address. Thus, a port may not have a
MAC address associated with it yet still have security
enabled. In this case, any end station attached to that port
is deemed “unauthorized.” Always disable Security Mode
on a port that does not have an assigned MAC address.
Clearing the Autolearning Database
Issue the following command to clear from the Autolearning database all
MAC addresses associated with port 1 on the Security Module in slot 3.
ONline> clear security autolearn 3.1 mac_address all [ENTER]
If you do not enter a MAC address, the command defaults to All, which
clears all MAC addresses from the Autolearning database for the specified
ports.
Clearing the Security Intruder List
The Security Intruder list contains information regarding the 10 most recent
intrusion attempts. Use the following command to completely clear the
Intruder list.
ONline> clear security intruder_list [ENTER]
Intruder List cleared.