Filter
Top Products
4 - 6 ONline 10BASE-T Security Module Installation and Operation Guide
address, the module forces a collision. The collision prevents intruding end
stations from gaining access to a port and transmitting unauthorized data
over the network.
Figure 4-2 illustrates an example of an Intrusion Detection configuration.
Figure 4-2. Example of Intrusion Detection
Defining Port Security Type
You must define a security type for each port on the Security Module.
Issue the following command to configure the security type 'full' for all
ports on the Security Module in slot 3.
ONline> set security port 3.all security_type full [ENTER]
You may elect to configure ports for Eavesdropping Security only, Intrusion
only, or Full (which includes both Eavesdropping and Intrusion). The default
setting for Security Type is Full.