Filter
Top Products
Configuring Security Features 4 - 15
Showing Port Configurations
You can display information about the Security Module ports using the
SHOW PORT SECURITY command. The following command displays:
– All of the addresses (up to four per-port) for a single port
or
– All 12 ports on a Security Module or
– All ports on all Security Modules in a concentrator
The command example shown displays security information for all ports on
the Security Module in slot 17.
ONline> show security port 17.all [ENTER]
Security Display for Module 5112M-TPLS in Slot 17:
Port
Mode MAC Addresses General Information
17.01 DISABLED 17-01-01-01-01-01 ETHERNET_1
17.02 EAVESDROP NONE ETHERNET_1
17.03 INTRUSION 01-02-03-04-05-06 ETHERNET_1
01-02-03-04-05-07
17.04 FULL NONE ETHERNET_1
17.05 FULL NONE ETHERNET_1
17.06 FULL NONE ETHERNET_1
17.07 FULL NONE ETHERNET_1
17.08 FULL 03-02-01-00-09-08 ETHERNET_1
03-02-01-00-09-09
03-02-01-00-09-0a
17.09 FULL NONE ETHERNET_1
17.10 FULL NONE ETHERNET_1
17.11 FULL NONE ETHERNET_1
17.12 DISABLED NONE ETHERNET_1
The command example shown displays all security information, including
configuration settings, for all ports on the Security Module in slot 17 (only 6
of the 12 ports are shown).