Filter
Top Products
Installing and Operating the Module 3 - 7
Switch 4 (Link Integrity) allows you to enable or disable Link Integrity.
Table 3-3 lists the functions and default settings for switches 3 and 4.
The complete definition of each dip switch function is contained in the
Configuring the Module section later in this chapter.
Table 3-3. DIP Switch SW1 Security and Link Integrity Settings
Switch Function
Factory
Default
Switch Setting
Off On
3 (Security) Enable or disable
security and enable
or disable port mode
for all 12 ports
enable Security
disable/
Port
enable
Security
enable/
Port
disable
4
(Link Integrity)
Enable or disable
link integrity for all
12 ports.
enable disable enable