Filter
Top Products
4 - 14 ONline 10BASE-T Security Module Installation and Operation Guide
❑ MAC addresses will not be Autolearned
❑ The port(s) will report an intrusion. (An intrusion is only reported if a
port Action_on_intrusion setting is configured to either
Disable_and_trap or Trap_only.)
Saving Security Configurations
The SAVE SECURITY command saves all security information for each port
on every Security Module, and on every Ethernet module in the
concentrator. Issue the following command to save security configurations
and make the information permanent.
ONline> save security [ENTER]
Reverting Security Configurations
The REVERT SECURITY command reverts all security information for all ports
on all Security Modules, and on all Ethernet modules in the concentrator to
their previously saved settings. Issue the following command to revert
security configurations.
ONline> revert security [ENTER]
Showing Security Configurations
The Security Module provides several SHOW commands that display:
❑ Port security configurations for a single port, all ports on a Security
Module, or all ports on all Security Modules in a concentrator
❑ Entries in the Autolearning database
❑ All entries in the Security Intruder list
The SHOW commands to display this information are described in the
following sections.