Filter
Top Products
Installing and Operating the Module 3 - 17
Showing Module Configurations
You can display status information about the Security Module using the
following management commands:
❑ SHOW MODULE
❑ SHOW MODULE VERBOSE
❑ SHOW PORT
❑ SHOW PORT VERBOSE
The following command displays detailed information about the Security
Module in slot 3:
ONline> show module 3 verbose [ENTER]
Slot Module Version Network General Information
3 5112M-TPLS 001 ETHERNET_1
5112M-TPLS: ONline 10BASE-T Security Module
Network Dip Setting: ETHERNET_1
Auto-partition Threshold: 63 COLLISIONS
The following command displays detailed information for port 1 on a
Security Module in slot 12.
ONline> show port 12.1 verbose [ENTER]
Port Display for Module 5112M-TPLS :
Port Mode Status Network General Information
12.01 DISABLED LINK FAILURE ETHERNET_1
Port Alert: ENABLED
Port Connector: TELCO
Mode Dip Setting: ENABLED
Security Dip Setting DISABLED
Link Integrity Dip Setting: ENABLED