Filter
Top Products
Alpha 583cx User’s Guide
GST/PST System for Canada
This appendix explains programming GST or PST for taxation in Canada.
Before you can use GST or PST, you must first program Flag 13. For more
information about programming flags, see Programming Flag Options on
page 56.
To program Flag 13
1 Put the PRG key in the Mode key slot and turn it to the PRG position.
2 If you are prompted for a Manager Password, type the password number
and then press the Check key. If you did not program a Manager
Password, go to the next step.
3 In the round Number keys area, press 131 and then press the Void key.
Canadian Tax Programming Example
The non-taxable limit is used in certain areas where tax is exempted below
a certain amount. For example, any amount below $4.00 is exempted from
tax. If there is no non-taxable limit, simply skip the step in brackets in the
procedure.
Example 69: GST Tax: 7%, PST Tax: 8%, GST/PST, Tax: Both 7% and 8%
calculated on net amount
1 Put the PRG key in the Mode key slot and turn it to the PRG position.
2 If you are prompted for a Manager Password, type the password number
and then press the Check key. If you did not program a Manager
Password, go to the next step.
APPENDIX B
abcoffice
www.abcoffice.com 1-800-658-8788