Filter
Top Products
Chapter 5: Setting Up Your Cash Register - Advanced
46 Alpha 583cx User’s Guide
Setting the Amount of Time Letters Appear in the Display
You can specify the amount of time letters appear in the display. The
shorter amount of time, the faster the message scrolls across the display.
To program the amount of time letters appears
1 Put the PRG key in the Mode key slot and turn it to the PRG position.
2 If you are prompted for a Manager Password, type the password number
and then press the Check key. If you did not program a Manager
Password, go to the next step.
3 Using the round Number keys, press 70. Press one digit number from
the chart below, representing the number of seconds you want to delay,
and press the Charge key.
Programming the Credit Keys
You can use 2 department keys as credit card-only keys. You can use one
or both keys if you want. For example, you can set Department 19 to be a
Visa® card and Department 20 to be a MasterCard®. You can also
program the cash register to print the name of the credit card on the
receipt or journal tape.
When you ring up a sale, you can use Department 19 or Department 20 to
finalize the credit card sale, open the cash drawer, and print the receipt or
journal tape.
You must set Flag 16 Option Number 1, 2, or 3 to use this feature. For
more information about setting Flags, see Programming Flag Options on
page 56.
Press this number... To specify...
0 0.2 seconds Fast
1 0.3
2 0.4 -
Default
3 0.5
4 0.6
5 0.7
6 0.8
7 0.9
8 1.0 Slow
abcoffice
www.abcoffice.com 1-800-658-8788