Filter
Top Products
Alpha 583cx User’s Guide 79
Running Management Reports
To reset the Z2 counter
1 Put the PRG key in the Mode key slot and turn it to the PRG position.
2 If you are prompted for a Manager Password, type the password number
and then press the Check key. If you did not program a Manager
Password, go to the next step.
3 In the round Number keys area, press 2, then press the Z2 Counter
starting number as 4 digits (for example 0001) and press the Return key.
To reset the grand total
1 Put the PRG key in the Mode key slot and turn it to the PRG position.
2 If you are prompted for a Manager Password, type the password number
and then press the Check key. If you did not program a Manager
Password, go to the next step.
3 In the round Number keys area, press 777777 and press the Amount
Tend Total key. Enter the new amount (up to 12 digits) and press the
Non Tax key.
To print a Department Range report
1 Put the PRG key in the Mode key slot and turn it to the X position.
2 If you are prompted for a Manager Password, type the password number
and then press the Check key. If you did not program a Manager
Password, go to the next step.
3 In the round Number keys area, press the Starting Department
number as 2 digits (for example 01). Press the Ending Department
number as 2 digits and then press the Amount Tend Total key.
Running an Hourly Report
The report shows the number of sales and the total sales amount for each
hour. All hours print, even if no sales were made in an hour. Times print
using a 24 hour format.
Important
An hourly reading must be closed out in the Z position.
To take an hourly report
1 Put the Z key or the PRG key in the Mode key slot and turn it to the X or
Z position.
2 If you are prompted for a Manager Password, type the password number
and then press the Check key. If you did not program a Manager
Password, go to the next step.
3 In the round Number keys area, press 11 and the Amount Tend Total
key. The Hourly report prints.
abcoffice
www.abcoffice.com 1-800-658-8788