Filter
Top Products
Alpha 583cx User’s Guide 47
Programming the Credit Keys
Note
If you want to use Departments 19 and 20 as credit card keys, they no longer
work as department keys until you set Flag 16 back to 0.
To program a credit key
1 Put the PRG key in the Mode key slot and turn it to the PRG position.
2 If you are prompted for a Manager Password, type the password number
and then press the Check key. If you did not program a Manager
Password, go to the next step.
3 To program a card name that prints on the receipt or journal tape, press
51 for Department key 20 or press 52 for Department key 19 and then
press the Return key. If you do not program a card name, it prints as
CREDIT 1 or CREDIT 2.
4 Type the name of the credit card just as you did when you programmed
Department names. You can type up to 12 characters and spaces.
For example, to type VISA, press the following keys:
• For more information about using the Department keys to type letters,
see Programming Department Keys on page 34.
Important
If you enter the wrong character, press the Void key to backspace and delete
that character. Now you can continue.
5 When you are done, press the Check key.
Press this key... To get this letter...
V
I
S
A
abcoffice
www.abcoffice.com 1-800-658-8788