Filter
Top Products
Layer 2 Queue Settings
26-3
26
Mapping CoS Values to Egress Queues
This switch processes Class of Service (CoS) priority tagged traffic by using eight
priority queues for each port, with service schedules based on strict or Weighted
Round Robin (WRR). Up to eight separate traffic priorities are defined in IEEE
802.1p. The default priority levels are assigned according to recommendations in
the IEEE 802.1p standard as shown in the following table.
The priority levels recommended in the IEEE 802.1p standard for various network
applications are shown in the following table. However, you can map the priority
levels to the switch’s output queues in any way that benefits application traffic for
your own network.
Command Attributes
• Priority – CoS value. (Range: 0-7, where 7 is the highest priority)
• Traffic Class
2
– Output queue buffer. (Range: 0-7, where 7 is the highest CoS
priority queue)
Table 26-1 Mapping CoS Values to Egress Queues
Priority
01234567
Queue
20134567
Table 26-2 CoS Priority Levels
Priority Level Traffic Type
1 Background
2(Spare)
0 (default) Best Effort
3 Excellent Effort
4 Controlled Load
5 Video, less than 100 milliseconds latency and jitter
6 Voice, less than 10 milliseconds latency and jitter
7 Network Control
2. CLI shows Queue ID.